From stuck in standby mode to sensor issues Hisense TV blinking codes error can mean anything. Learn error meanings and their fixes.
When an issue occurs in your Hisense TV, its red power light starts blinking. The blinking pattern varies in different problems. For example, it may blink twice if the problem is related to power and blink 10 times if there is some issue in the mainboard.
In short, you have to understand the Hisense TV flashing codes to take necessary measures to get rid of the problem. I have gathered information about each blinking code, their reasons, and solutions. So, let’s begin!
Hisense TV Blinking Codes Error Meanings And Fixes 
Before heading towards the solutions, let’s get to know the causes first. The following are the reasons according to the light blinking pattern.
- 1 time – TV has stuck in the standby mode
- 2 times – Power issues – unstable power supply or faulty power board
- 3, 7, 8, or 9 times – Issue with backlight or inverter
- 4 times – Faulty mainboard or video processing
- 5 times – Problematic T-CON board
- 6 times – Problem with the cooling system or internal temperature sensor
- 10 times – Powerboard, mainboard, or LED driver/strip issues
I hope now you can easily decode the problems in your Hisense TV by understanding the Hisense TV error codes. Now, let me explain the simple tricks to troubleshoot Hisense smart TV light flashing.
Hisense TV Light Blink 1 Time
As mentioned above, when the TV is stuck in standby mode, its light flashes a single time. This isn’t a big problem and can be fixed quickly, here’ how: Grab your Hisense TV remote and press the Power button. It will immediately Power ON your television, and the standby red light will switch OFF.
If this fix doesn’t work, ensure that your remote is working fine, check its batteries and try again. If the remote is not working, you can Turn ON your Hisense TV without the remote using the physical button on the Smart TV.
ALSO CHECK: How To Reset Hisense TV Without Remote
Red Light Blinks 2 Times
- First of all, check the power supply of your home. Fluctuation or voltage problems can cause your TV light to blink.
- Check the power cables. Damaged or rusted cables can interrupt the power supply. If any cable is damaged, replace it with a new one.
- A soft reset can solve this issue. Turn Off your TV -> unplug it from the wall socket -> wait for a minute -> plug in the TV.
- If nothing works, call a technician to identify and fix the problem.
Red Light Blinks 6 Times
If your TV is not placed in a properly ventilated area, it will overheat, and this can cause issues in the cooling system or internal temperature sensor.
- Ensure your TV is getting proper airflow.
- It is not hung too close to the wall.
- Ensure it is out of direct sunlight.
- If your TV is placed in an airy, open, and moderate temperature room but still blinking 6 times, you need to call a Hisense TV technician to solve the issue.
Red Light Blinks 3 Times
Red light blinking thrice, taking a pause, and blinking again mean there is an issue with the backlight or the inverter circuit. This is a hardware issue and can be challenging for a not-so-tech-savvy person.
You need to replace the backlight or fix the inverter circuit. So, it is recommended to consult a technician to open the back panel and fix the problem.
Note: The issue is the same if the red light blinks 7, 8, or 9 times.
Red Light Blinks 5 Times
The messenger between the mainboard and the screen is the T-CON board. Any issue with this board causes your Hisense TV’s red light to blink 5 times. Depending on the issue, the T-CON board will either get replaced or repaired. Your technician will decide this after examining the T-CON board.
READ NEXT: Hisense Smart TV Stuck On Logo Screen
Red Light Blinks 10, 11, 15, 17,19, 20 Times
Sometimes, your Hisense TV’s red light blinks 10 times and then turns Off, but despite displaying an image, you see a blank screen (with or without sound). It can be due to problems with LED drivers or LED strips.
If your TV starts flashing after hitting the power button, it indicates that there is no issue with the power supply. There are chances that the main/power board is unable to distribute the power to the TV to get started due to a faulty capacitor or diode. Here is what you need to do to fix the issue.
- Check all the LED strips with an LED tester or a battery. If damaged, replace them.
- Check and replace the LED driver on the power supply board.
- Depending on the cause, you might need to replace the whole power supply board.
- Lastly, check the main board. Test it with a meter to identify whether it is faulty or not. If yes, you can replace it easily.
Note: The main board and power board are easy to replace as they are plug-and-play.
You can solve a Hisense TV problem by understanding its blinking codes. From the above-mentioned guide, you can not only understand Hisense TV blinking codes meanings but also solve it. However, if the issue is related to a hardware component, we will recommend you to contact Hisense TV customer service or a professional technician to find and fix the problem. I hope the article was helpful. If you need further guidance about Hisense TV, comment below!
- Roku Asking For Pin To Add Channel [Here’s An Easy Way Out] - November 28, 2023
- How To Turn Off Voice On Vizio TV  - November 24, 2023
- How To Reset Toshiba TV With & Without Remote  - November 24, 2023