How To Reset Dynex TV With And Without Remote?

To factory reset Dynex TV open the “Service Menu” on the television. This menu has a ‘Reset' option. Select it to restore your TV to default settings.

There have been complaints regarding the Dynex TV not turning on, turning off itself, getting stuck on logo, other display and sound related issues. To get rid of all these problems you can troubleshoot Dynex TV by soft or factory reset.

How To Factory Reset Dynex TV

It can be a little complicated to hard reset Dynex TV.

A hard reset will restore your Dynex TV back to default settings and it will fix all the problems you are facing.

The Tech Mamba brings a complete step-by-step guide, so you can quickly reset Dynex TV with and without a remote.

  1. Locate the “INPUT” button on the remote and press it.
  2. Once done, you need to enter this code “2580.”
  3. After this, the “service menu” will open up on the screen. This menu is usually yellow and green in color and is located at the top left corner of the screen.
  4. Now, use the “DOWN SCROLL” button on the remote and open “OTHER SETTINGS.”
  5. In this new menu, you need to look for “EEPROM Init.” Once again, select and press OK.
  6. Follow the on-screen instructions and this will restore Dynex TV to its default settings.

Resetting Dynex TV Without Remote

If you have lost your Dynex TV remote, due to some issues the TV isn't responding to the remote control, or the screen of your TV is blank.

Try the steps given below to restore Dynex TV to factory settings. Here's what you need to do:

  • Locate the buttons on the TV's hardware. They are present at the back of your Dynex TV.
  • Now hold the “MENU” and “VOLUME DOWN” buttons simultaneously.
  • While still holding down these two buttons, you also need to press the “POWER” button on the TV.
  • When you do this, the blue light will light up. Don't let go of the buttons yet; you need to wait for 10 seconds.
  • After ten seconds, you can release the “MENU” and “VOLUME DOWN” buttons while still holding down the “POWER” button.
  • Release the “Power” button and switch ON your TV, it will be restored to its default settings.

Before jumping on to the reset steps check the following things:

  • First of all, check all the cables and connections of your Dynex TV.
  • See if all the cords are plugged into the color-coded slots properly. If not, then that’s the issue, and you will not need to factory reset your television.

However, if there is no problem with the cables or connections, grab your remote and follow the next steps.

Soft Resetting or Power Cycling Dynex TV

Follow the below-given steps to quickly soft reset Dynex television:

  • Unplug the AC cable adapter of your Dynex TV, and wait for 60 seconds.
  • After 60 seconds, hold down the Dynex TV “POWER” button for 60 seconds. (While the cable adapter is still unplugged).
  • Wait for 60 seconds, and then plug the AC adapter back in the socket.
  • Now turn on the Dynex TV.

One of these methods will definitely work, but if none of these works, you need to check the main AC fuse of your TV.

There must be a problem with the transistors or the main AC fuse. Once fixed, the TV will turn on.

Note: You can get a universal remote for your Dynex TV and perform the factory reset with it.

Dynex TV Troubleshooting Tips

If your Dynex flat-screen TV isn't broken or damaged, but you are still facing issues, then troubleshooting should be helpful. These troubleshooting tips will solve any minor trouble:

  • If your Dynex TV doesn't have any sound, check the sound cord. See whether it is plugged in the right port properly or not.
  • Also, check the outlet and see if it's working or not. Lastly, don't forget that sometimes a channel itself does not have any sound, so try checking different channels as well.
  • If the visuals of your TV are too dark, then you need to check the color saturation and adjust it accordingly. You can also try adjusting the contrast and brightness.
  • The snow or unwanted noises are usually caused by some problem in the cable or antenna. Try fixing them, and the problem should definitely go away.
  • If the image on your Dynex TV is dotted or has any lines on it, you should try moving the TV away from any noisy place, especially traffic noise.
  • A double image display can be fixed by using a better-quality cable or antenna.
  • If you want to reset the parental control password, then go to the parental control settings and enter 9999. This way, you'll be able to set a new password.
  • Lastly, if the buttons on your Dynex TV stop working, unplug the power cord for at least 60 seconds. Plug it back in the socket, and the buttons should work just fine.

Final Words

Factory reset of Dynex TV can fix almost all kinds of issues related to the firmware. You can restore Dynex TV to original settings if the tv screen went black, channels tunning problem, tv restarting automatically, picture lagging, etc. If even after performing the reset the issue didn't solve then we suggest you to take help of a professional or contact Dynex TV customer support for help.


  1. I have tried every youtube video to fix my problem but nothing works. I suddenly have a NO SIGNAL button on the DYNEX tv and my fire stick remote is not working any longer. I can’t get to the Amazon set up screen – it is just a black green with that error message. I tried a factory reset – not sure if that happened, but nothing is getting rid of that message. The wifi is fine – tv and remotes were all working yesterday. Literally have been working on this for hours and now I’m in tears . Please help me

    1. Jayne Halliwell says:

      I have the exact problem. Did you get it sorted?

  2. I’ve tried your hard and soft reset, carefully following the instructions. Nothing. The screen doesn’t even register as being on at all. What now?!

  3. cecil anderson says:

    tv is set in spanish how do i change it back

Leave a Reply

Your email address will not be published. Required fields are marked *